LPI Lightning Strike Recorder

Specifications:

Lightning strike recorder must be accompanied with every protection system. The mechanical type LPI lightning strike recorder must be non-resettable with 7 digits. No battery is incorporated, as we can not rely on the battery life. Unreliable battery life is the reason LCD screen is not permitted. The job of LPI lightning strike recorder is to activate one count in the register for every discharge where the peak current goes over 1500A at the 8/20 micro second waveform and a maximum of 220 KA. This robust and easy to install device has a counter which is driven by the energy of the lightning discharge and requires no external or battery power to operate. It must be tested to ensure its compliance to IEC 60-1:1989 standard in line with the lightning arrester for a impulse current of over 450 KA (8/20 micro second). Manufacturer's instructions must be followed during installation. It must be installed 2 mtrs above the ground to simplify the task of taking reading at regular intervals.

• Product Details:
• Usage:    Industrial, Laboratory

Technical Data:

Ordering Code	LSR1
Description:	Lightning Strike Recorder
Current sensitivity:	1500A 8/20 1/4s impulse
Operating range:	Min. 1500A and Max. 220kA 8/201/4s
Display	Mechanical 6 digits display (not re-settable).
Dimension:	80mm (B) x 82mm (H) x 65mm (D)
Weight:	0.4 kg
Mounting:	Adjustable stainless steel cable ties to accommodate a cable up to 40 mm dia. Cable or 50mm x 5mm flat tape
Construction:	Polycarbonate enclosure
Colour:	Light Grey
Environment:	IP 67 (IEC 529)
Operating Temperature:	-15oC to 65oC